Your phone captures a page at many megapixels and shows it to you on a screen sharp enough to read the fine print on a medicine bottle. Then you fax it, and the person on the other end says it’s hard to read. Nothing went wrong, exactly. Fax was designed decades ago around a much lower resolution and around black and white, and your page has to squeeze through that pipe.
Understanding what the pipe does helps you send pages that come out the other side intact. It also saves you from fussing over things that don’t matter, like file size.
What fax does to a page
When a page is faxed, it’s converted from whatever you scanned (a color photo, a PDF, a grayscale image) into a grid of dots, each one either black or white. That grid is sent line by line to the receiving machine, which prints it or saves it as an image.
Two things about this matter for readability.
The grid is coarse. Standard fax resolution is roughly 200 dots per inch across the page and about 100 lines per inch down it. Fine resolution keeps the same horizontal detail and roughly doubles the vertical, to about 200 by 200. For comparison, a typical office scanner works at 300 dots per inch or more, and a phone camera captures far more detail than that. Some fax equipment supports higher modes, but you can’t count on the receiving machine supporting them.
In practice, almost all faxes are received in black and white. Color and grayscale modes exist in the standards, but they’re rarely supported. For everyday sending, assume that every pixel becomes black or white. Shades of gray are often faked with patterns of dots, called dithering or halftoning, which looks fine for a photo seen from a distance and terrible for small text sitting on a gray background.
The result: details smaller than a couple of dots get lost, and anything that depends on subtle shading gets turned into texture.
Standard vs fine: when it matters
Standard resolution is fine for large, clean, typed text, such as a letter in a normal font size. Fine resolution is worth using when your pages include:
- Small print, footnotes or dense forms
- Signatures and handwriting
- Checkboxes and tick marks
- Tables with thin lines
- Anything with numbers where a 3 versus an 8 matters, which is most things
The trade-off is transmission time: fine resolution sends more lines per page, so each page takes longer. Many fax services pick a sensible resolution for you, and some don’t expose the choice at all. If yours does, fine is the safer default for anything you’d be annoyed to have misread.
What fine resolution can’t do is rescue a page that was already unreadable. If the text is faint, blurry or sitting on a gray shadow, sending it with more lines just sends more lines of mush.
Why file size mostly doesn’t matter
People often worry that their PDF is “too big” or “too small” to fax well. File size on your phone and fax quality are only loosely related.
A very large color scan and a small black-and-white scan of the same page can produce nearly identical faxes, because both get converted to the same coarse black-and-white grid before sending. The big file just carried a lot of color information that was thrown away. Conversely, a heavily compressed image with blocky artifacts around the letters can fax worse than its small size suggests, because those artifacts become black specks.
File size matters in a few practical ways: large files take longer to upload, some services cap file size, and very long packets of photos can be slow to prepare. But if you’re choosing between two scans, judge them by how they look zoomed in, not by megabytes.
What else affects readability
Resolution is only one factor, and usually not the biggest. The others connect to the black-and-white conversion like this.
- Contrast. How light tones are handled depends on the service: some push anything lighter than a cutoff to white, others turn grays into dot patterns. Either way, dark text on a bright white background survives, while light gray text, blue ink, pencil and text on shaded backgrounds are at risk. The anatomy of a readable fax is the checklist for judging a finished page.
- Text size. Small text has fewer dots to work with. Text much smaller than a normal body font tends to break up at standard resolution and holds up noticeably better at fine. For a letter or cover page you write yourself, 11 or 12 point text in a plain font is a safe choice.
- Sharpness and page shape. Blur turns into ragged edges, and a tilted or curved page makes uneven lines of text. Light, angle and background are covered in light, angle and background for a clean scan. Scanning apps that detect edges and flatten the page, FaxLane among them, help with the shape.
- Scale. A small item such as a receipt or ID card, shrunk onto a full page, loses dots. Crop it so it fills a sensible part of the page, as in the guide to faxing receipts and photos.
The resolution setting, standard or fine, comes after all of these. It matters, but it can’t rescue a page that fails on any of the four.
Common mix-ups about resolution and size
A few ideas sound sensible and turn out not to help:
- “I’ll scan at the highest setting to be safe.” The extra detail is thrown away in conversion. It makes the file bigger and slower to prepare without making the fax any sharper.
- “I’ll shrink the PDF so it faxes faster.” Shrinking by heavy compression can add blocky specks around letters, and those specks turn into black dots. A modest file that is sharp is better than a tiny one that is smudged.
- “A bigger file means a better fax.” Two scans of the same page, one with color information and one without, can produce the same fax.
- “Fine resolution will fix this page.” It adds vertical detail, but it can’t bring back faint ink or sharpen a blur. If the pages arrive hard to read, the diagnosis in the fix for an unreadable fax is the better place to start.
- “Black and white is a setting I can turn off.” In practice it is the format, not an option. Plan the page for it.
Previewing what the recipient will see
The most useful habit is to look at your pages as a black-and-white image before sending. If your scanning tool has a black-and-white or document filter, apply it and zoom in. What you see is close to what the fax will look like, roughly speaking. If the important text survives that, it’ll survive the fax.
If you’re sending through FaxLane, nothing goes out until you’ve reviewed the whole fax and tapped Send, so there’s a natural moment for this check.
When the other end is the problem
Sometimes your page is perfect and the received copy still looks poor, because the receiving machine is old, low on toner or printing in a draft mode. If everything looks poor and your preview looked good, the problem may be on their side. If it is one page or one area, rescan that page. The symptoms and what to say to the recipient are in the fix for an unreadable fax.
Readability is mostly decided before the fax is sent, by the light and contrast in your scan. Get the page crisp and high contrast, keep the text a sensible size, and the old pipe will carry it just fine.
Quick answers
Does a higher resolution scan make a fax look better?
Only up to a point. A fax is sent at the fax resolution, which is far lower than a modern phone camera, so the extra detail in a very high resolution scan is discarded during conversion. What makes a bigger difference is contrast, clean backgrounds, sharp focus and text that isn't too small.
What is the difference between standard and fine fax resolution?
Standard resolution sends roughly half as many lines down the page as fine resolution, so small text and fine detail look coarser. Fine resolution keeps more vertical detail and is better for small print, signatures and forms, at the cost of a longer transmission. The horizontal resolution is about the same for both.