When the recipient says your fax is unreadable

Why faxed pages come out dark, faint, blurry or sideways, how to tell which problem you have, and how to rescan and resend so the next copy is easy to read.

The fax went through. The status said delivered. Then someone from the office calls to say they can’t read it, or worse, that a key number on page two is a gray smear. Now you have to send it again, and you’d like the second attempt to be the last.

Unreadable faxes almost always come down to a short list of problems, and most of them are visible before you send if you know what to look for. Start from what the recipient tells you, and work back to what likely caused it and how to fix it.

First, ask what “unreadable” means

“We can’t read your fax” covers a lot of ground. A quick question or two narrows it down:

  • Is the whole page dark, or just parts of it?
  • Is the text there but too faint or small?
  • Is it blurry or smeared?
  • Is the page sideways or upside down?
  • Is something cut off at the edge?
  • Is it one page, or every page?

Their answer points you to one of the sections below. It also helps you spot the case where the problem isn’t on your end at all.

If the recipient is on the phone, ask them to read out one specific detail, such as the total on page two or the date next to your signature. Whether they can read it aloud tells you more than “it looks bad.” If their office views faxes on a screen, ask whether they can zoom in, since a page that is hard to read at full-page size is sometimes fine enlarged.

Dark, gray or speckled pages

What they see: pages with a gray or black background, dark patches, or a sandpaper texture that swallows the text.

Why it happens: the page was gray before it was sent. In practice fax is almost always black and white (the guide to resolution and file size explains the conversion), so shadows, off-white paper and colored forms come out as dark patches or speckle.

How to fix it:

  • Scan the page flat, in bright, even light. The guide to clean phone scans covers shadows and where to stand.
  • Use a scanner app rather than the regular camera. A scanner app detects the page edges, crops away the background and whitens the paper. FaxLane’s scanner finds the edges for you and includes a clean-up step for exactly this kind of page.
  • If the original is printed on colored paper, ask whether a photocopy on white paper is acceptable, or scan with the cleanest settings you have and check the result closely.

Faint, broken or tiny text

What they see: text that’s there but too pale, words with missing strokes, or numbers too small to make out.

Why it happens: light detail is the first thing to go. Pencil, pale blue ink, thin decorative fonts and small print in footnotes are the usual victims. Overexposed scans, where the app has brightened the page so much that light ink disappears, make it worse. Receipts and thermal paper fade this way too, and faxing receipts and photos has specific fixes.

How to fix it:

  • Fill in forms with dark ink, black for preference. Rewrite anything in pencil.
  • If you created the document yourself, use a plain font at a normal size.
  • Zoom in on your scan before sending. If you have to squint at a number on your phone, the recipient will be squinting harder.
  • If a critical number is in tiny print, consider writing it clearly in the cover page message as well, so they have a second place to find it.

The checklist for a readable fax covers ink, text size and signatures in more detail.

Blurry or smeared pages

What they see: soft, out-of-focus text, or a smear across part of the page.

Why it happens: the phone moved while capturing, the camera focused on the table rather than the page, or the page wasn’t flat. Curled paper creates areas that are both blurred and shadowed.

How to fix it: hold the phone steady and parallel to the page, let it focus, and flatten the paper. Weigh down curled corners with something that stays out of the frame. Automatic capture, which takes the picture when the page is steady and in view, helps a lot here.

Sideways and upside-down pages

What they see: a page that’s rotated, so they have to turn the printout or tilt their head to read it.

This isn’t strictly unreadable, but in an office processing piles of faxes it can get a page set aside or misread. Check orientation as part of your final look through the draft. FaxLane lets you rotate individual pages before sending, which is easier than rescanning.

Cut-off edges and missing margins

What they see: a signature half gone, a page number missing, text running into the edge, or a header that seems to have lost its first line.

Why it happens: a few separate things cause this.

  • The crop was too tight and trimmed part of the page. Look at the edge-detection result before you accept it, especially at the bottom, where a thumb or shadow can pull the crop upward.
  • The page was bigger than the scan area, so one side hung over the edge of the frame.
  • A header line added during transmission, or a machine that trims a thin border, covered content sitting right at the edge.

How to fix it: rescan with the whole page inside the frame and a small border of background visible on every side. Open the crop on any page where content touches the edge. If the original has printing right to the edge, such as a form with a footer, say on the cover page what the footer should contain, so a missing line is easy to spot.

Highlighting, stamps and color marks

Color carries meaning on your screen that it can’t carry on a fax. Yellow highlighter, which looks friendly in color, can become a gray or dark bar that obscures the very text you wanted to draw attention to. Red stamps and colored signatures may come through faint or dark depending on how they convert.

To draw attention to something, circle it, underline it or mention it on the cover page instead, as the checklist for a readable fax suggests.

When it’s not your scan

Sometimes your pages are fine and the receiving machine is the problem. A fax machine that’s low on toner or ink, has a dirty print head, or is printing on curled or cheap paper will make any fax hard to read.

Clues that the problem is on their side:

  • Your scans look crisp and clean on your phone.
  • The recipient says every page has the same faint streak or blank band.
  • Other faxes you’ve sent recently arrived fine elsewhere.

In that case, say so politely: “The pages look clear on my end. Could you check whether your machine is printing properly, or whether it’s saved digitally so you can view it on screen?” Many offices receive faxes into a computer system as well as or instead of paper, and the on-screen copy may be perfectly legible.

Resending the fixed version

Once you’ve rescanned the problem pages, resend in a way that makes the new copy easy to identify:

  1. Rebuild the full packet with the rescanned pages swapped in, keeping the rest as it was, so the recipient gets one complete set.
  2. Look through every page at full size before sending.
  3. Add a cover page saying this is a clearer copy that replaces the earlier fax, with the original date and any reference number.
  4. Send it, then let the recipient know it’s on its way.
  5. Keep the new delivery receipt alongside the old one.

If the problem was a single number or detail, a brief message on the cover page restating it gives the recipient a backup.

A pre-send check for the next one

Before you tap Send on anything important, page through the draft and ask of each page: is the background white, is the text black and sharp, is it upright, is everything inside the edges, and could I read every number at arm’s length? Two minutes of looking costs far less than a phone call telling you to do it all again. The checklist for a readable fax turns that look into a longer list for pages with signatures, small items and double-sided forms.

Quick answers

Why does my fax come out dark or blotchy?

Dark or blotchy pages often start with a gray scan: dim light, a shadow across the paper, or a colored background. Check your scan on screen and look for gray where the paper should be white. Rescanning flat in even light, with the page cropped and cleaned up, usually fixes it.

Why is the text on my fax too faint to read?

Faint text usually comes from light pencil, pale ink, thin fonts, small print or a scan that was too bright. Fax tends to drop fine, light detail. Use dark ink, avoid very small text, and check that your scan shows crisp black text before sending.

Can the recipient's fax machine be the reason my fax is unreadable?

Yes. A receiving machine that's low on toner or ink, has a dirty print head or is printing on poor paper can make any fax hard to read. If your pages look clean on your screen and other faxes from you arrive fine elsewhere, ask the recipient whether their machine is printing properly.

Keep reading